Cleaning feed screws used to mean shifts of manual wire brushing, hazardous torch work, or chemical strips that nobody wants in their plant. The AeroBlast mobile cleaning system replaces all three — a patented enclosed blasting platform that takes carbonized polymer down to bare metal in well under an hour, dimensionally intact, with one operator.
Multiple passes — but a single operator, no manual labor, and a turnaround that collapses from a full shift into well under an hour.
Open the clam-shell cabinet and load the screw onto integrated support stands.
Advance the cabinet along the screw axis, blasting each section in sequence.
Spent media is automatically reclaimed, classified, and recirculated — closed-loop.
Pull out a dimensionally intact, fully cleaned screw — in well under an hour, not over a full shift.
Two grades from the granulated line carry the weight on feed-screw work.
Versatile, all-purpose cleaning — and surface/adhesive cleanup. Best for general screw and mold work where paint and powder-coating residue is the target.
See Type II in Products
The most aggressive grade in the granulated line. Use it on steel and chrome feed screws where carbonized buildup demands real cleaning power.
See Type III in ProductsCycle time collapses. What once took multiple operator shifts now wraps up in well under an hour.
Fully enclosed cabinet — no torch, no chemicals, no silicosis risk to operators.
Reusable plastic media plus automatic reclaim slashes per-cycle media cost.
Non-abrasive media preserves screw geometry and finish — no thermal distortion, no etching.
Tell us about your application and our in-house engineers will compose a custom solution — engineered for your substrate, your tolerances, and your production environment. No obligation.